Secure the new box to a brace between ceiling joists. Otherwise, install an expandable metal ceiling-fan hanger bar. These may be positioned either from the attic or from below the ceiling, through the rough opening. Secure the box to the bracket with a U-bolt. A properly installed mounting bracket ensures a safe and efficient ceiling fan.
Here are the steps on how to install it correctly:. Remove the fan motor screws. These screws will be used later to secure the blade arms to the motor. If the fan comes with a J-hook, install the mounting bracket with the J-hook toward the floor. The hook will support the weight of the fan motor housing for a hands-free wiring installation.
Downrod installations are used for both standard and angled applications. Thread the lead wires from the motor black, white and blue through both the canopy and downrod. Take extra care not to pull on the electrical wires. Insert the downrod into the collar yoke and rotate until the holes match.
Insert the connector pin through the holes, and secure with a cotter pin. Be careful not to damage or cut the fan wires. Affix the hanger and downrod to the motor assembly by tightening the set screw on the side of the downrod. Some fans have two set screws, while others have lock nuts for the set screws. Insert the ball into the hanger bracket. The tab opposite the hanger bracket opening should fit into the slot on the ball. Make the appropriate wire connections. Part 2. Turn off the circuit breaker that controls the power to your ceiling fan.
Between the time you assessed whether you could possibly attach a light assembly and when you actually install it, you have probably turned back on the circuit breaker. Make sure that you turn it off once again! Unscrew the cap hiding the wires and set it aside. Be sure to keep track of the parts you are removing.
You will probably no longer need the cap but you may need any screws that it was attached with. Connect the light's wires to the fan's wires with wire nuts. This should be done by simply lining up the two matching wires so that they are parallel and screwing a wire nut on the end, like you would a lid on a bottle. For instance if there is a white and a black wire in the ceiling fan and a white and black wire coming out the back of the lighting assembly, simply wire nut like colors together.
That being said, it's best to follow any directions that have been supplied with your lighting assembly. Screw the lighting assembly onto the ceiling fan. This attachment should go smoothly, especially if you have purchased a lighting assembly designed to be attached to your ceiling fan.
Install light bulbs, glass shades, and pull chains, following the directions provided by the manufacturer. Usually shades on ceiling fixtures are held in place with thumbscrews, which, when screwed in, simply keep the shades attached with a light amount of pressure on multiple sides of the shade. Flip the circuit breaker back on, pull the chain, and check out your newly-improved fan!
Now you should be able to feel a cool breeze from the fan while enjoying a brightly lit room. Did you know you can get expert answers for this article? Unlock expert answers by supporting wikiHow. Allen Lee Home Improvement Specialist. Allen Lee. Support wikiHow by unlocking this expert answer. Not Helpful 0 Helpful 0. Include your email address to get a message when this question is answered.
By using this service, some information may be shared with YouTube. If you have doubts about being able to complete this project safely, ask someone with experience to help or hire an electrician. Helpful 0 Not Helpful 0. If you have a light assembly on your ceiling fan already that has stopped working and you have checked the light bulbs , you can follow these directions to replace the lighting assembly instead of the whole ceiling fan.
In some cases it may be less expensive and quicker to simply buy a new ceiling fan that already has a light attached to it. If you are having trouble finding a light kit for your existing ceiling fan you may just want to scrap it and start over with a brand new one. Flip off the breaker or unscrew the fuse if you have an old fashioned fuse box before doing any sort of electrical work.
If you are unsure of which fuse or breaker controls the circuit you are working on, play it safe and turn off the whole panel. A new light isn't worth a trip to the hospital! Helpful 2 Not Helpful 1. You Might Also Like How to. How to. Home Improvement Specialist. Expert Interview. About This Article. Co-authored by:. Co-authors: 9. Updated: January 27, Then, feed the fan pull chain through the hole located in the side of the cap.
Feed only the light pull chain through the finial. Attach the finial to the threaded rod and tighten by hand. Attach the short chains coming from the switch housing to the appropriate pull chain pendants.
A no-light cap covers the portion of the fan where a light kit would normally be installed. If you'd rather use a no-light cap instead of a light kit, use these steps to properly install it. Remove the two screws on the light kit that connect the light kit to the lower switch housing.
Disconnect the blue and white wires inside the light kit and lower switch housing. To safely cap off wires not being used, install the dummy terminal included with the light cap. Attach the terminal to the ends of each wire located in the lower switch housing. Use a Phillips head screwdriver to install the switch housing cap with the two switch housing screws you previously removed earlier. Connect the lower and upper switch housing with the connectors.
Make sure you align the colored markings on the connectors. Carefully lift the switch housing and position it at the bottom of the fan.
Position the holes on the mounting ring located at the top of the switch housing with the spaces in the mounting bracket located on the bottom of the fan.
While holding the body of the fan as still as possible, engage the locking pin by turning the light fixture clockwise. Listen for a clicking sound to verify the connection is secure. Hunter offers a variety of ceiling fan controls that make it simple to control your fan and light. Most handheld remotes and wall controls come pre-paired to the ceiling fan. Handheld remotes let you conveniently control your fan's features. Follow these steps to use your handheld ceiling fan remote:.
To change the direction of the fan, press and hold the fan button. To turn the ceiling fan light on and off, press the light button. Press and hold the arrow buttons to enable the dimmable ceiling fan light options. Hold the light button down to dim the ceiling fan light. Wall controls are installed at the wall switch, making it easy to remember where your ceiling fan control is located.
Follow these steps to use your wall control. Turn the ceiling fan light on and off by pressing the light button. Smart fan controls let you use your smart phone or smart home devices to control your ceiling fan.
If you've been wondering how to install a ceiling fan, hopefully, this Hunter ceiling fan installation guide will successfully navigate you through the process. Remember that hiring a certified, professional electrician is always an option if you feel uncomfortable with any step listed above.
After your new Hunter ceiling fan is installed, you might need to do some regular ceiling fan maintenance from time to time. Use our simple ceiling fan installation tips to keep your Hunter fan working in great condition.
Hunter Casablanca Industrial. Login Create Account. Close Menu. Submit Search Submit Search. Close search. Ceiling fan installation guide While installing or replacing a ceiling fan might seem complicated, ceiling fan installation is a relatively straightforward process.
How to Install a Ceiling Fan? Getting Started 1. Uninstall and Remove an Existing Fixture 2. Install the Ceiling Bracket 3. Wire the Ceiling Fan 4. Finish Installing the Canopy or Motor Housing 5. Install the Blades 6. Install the Lighting 7. Use the Remote Controls.
Copy Embed Code. How to install a ceiling fan video by Hunter Fan. When referring to our ceiling fan installation guide, keep the following in mind: The videos and instructions included within the guide generally apply to the installation of most Hunter fans, however the directions for your specific fan model may differ slightly.
This guide should only be used as supplemental material to the model-specific fan manual included with your purchase of a Hunter ceiling fan. Always refer to your manual for the most accurate instructions for installing your fan.
If your manual has been misplaced, you can easily find and download the model-specific manual for your Hunter fan. As an alternative to DIY ceiling fan installation, you can hire a professional to install your fan. Through Hunter's partnership with HomeAdvisor, the largest home improvement network service in the U. Skill Level Skill Level: DIY Friendly While you don't need to have a lot of experience in order to install a ceiling fan, every situation is unique, so some installation projects may require more skill than others.
Getting Started. Ceiling Bracket. Remote Controls. How to install Getting started video. Before you begin your Hunter ceiling fan installation project, follow these steps to ensure a smooth and safe process: Turn off power at both the wall switch and circuit breaker. Before beginning a ceiling fan installation project, make sure you practice these general safety rules to avoid the risk of personal injury and property damage: Shut off power at the circuit breaker before starting the project.
The power should be left off until the fan installation is complete. Follow all manufacturer instructions for additional safety, caution, and warning information. Verify the installation site has a properly installed ceiling fan-approved box that's rated for the weight of your fan, or confirm you can hang your fan from the building structure. Make sure there aren't any obstructions at the ceiling fan installation site. To prevent serious injury or death, make sure all screws are tight to secure the light fixture.
To prevent serious injury or death, make sure that the light glass is properly secured. CHECK that the setscrew is tight using pliers each time you change the ceiling fan direction.
To reduce the risk of personal injury, do not bend the blade brackets when installing the blade brackets, balancing the blades, or cleaning the fan. Do not insert foreign objects in between rotating fan blades. Ladder Ladder.
Screwdriver Screwdriver. Wire Tester Wire Tester. Electric Drill Electric Drill. Pliers Pliers. Wire Strippers Wire Strippers. Step 1 Uninstall and remove an existing fixture. Learn how to replace a ceiling fan with these simple steps: Step 2. Install the ceiling bracket To ensure that the ceiling fan is securely attached to the structure, you must use the Hunter bracket that came with your fan.
How to install a ceiling fan bracket video. For downrod fans There are two ways you can secure the ceiling bracket to the ceiling: by using the machine screws included with your ceiling fan-rated box or by using the wood screws and washers included with your Hunter fan.
Slide the canopy over the downrod and wires. How to install a bracket for a low profile ceiling fan video. For low profile fans When installing a low profile fan, you can mount the motor and wire it without the use of a downrod or canopy.
Step 3. Wire the ceiling fan.
0コメント