In this scenario, the system does not load driverB. When this occurs, you receive the following error message:. This problem occurs because the system does not support a change in the hardware configuration of devices that are boot critical.
The system has a built-in feature to reduce resource consumption by not loading unnecessary drivers. This feature determines whether a specific driver is set to load automatically at system startup but is not required during startup.
If the driver is not required at startup, the system may change the driver to a start type of Demand Start. Because of this feature, drivers that are necessary to start the system under alternative hardware configurations may be set to Demand Start. If the hardware configuration of the system changes, the system may not find the volume that is necessary to start the system.
If this occurs, the Stop error that is mentioned in the "Symptoms" section is generated. To resolve this issue, restart the system in safe mode. In safe mode, any change to a driver's Start Type setting is reversed, and the values are re-created. For more information about how to start in safe mode, see the following Microsoft Knowledge Base article:. One-click series.
For more information about how to troubleshoot Stop error 0x7B, go to the following Server and Tools Team blog article:. Sorry this didn't help. Thanks for your feedback.
Your PC ran into a problem and needs to restart. Windows shows this problem. Startup contents not shows all about it. This thread is locked. You can follow the question or vote as helpful, but you cannot reply to this thread. I have the same question Report abuse.
Details required :. Cancel Submit. It usually is a combination of the "ESC" key and one of the "Function" keys.
It fixes the Windows stop code Unmountable Boot Volume error too! It re-deploys the system image from scratch and fixes any potential conflicts or issues, in this case - the BSOD error, upon completion. Click on the "Command Prompt Admin " option. Step 3: Reboot your system once the process is completed and you are good to go.
Follow the step-by-step instructions below to get rid of "Update Pending" packages in your system. We are identifying the "Update Pending" packages and moving them into a temporary file using the last command to get rid of them. Once you have gotten rid of these packages, reboot your system. The stop code - Inaccessible Boot Device error should be fixed by now! The antivirus software in your system could be the reason behind the stop code - Inaccessible Boot Device error.
If you are not sure about the above step, update your antivirus software. Check if the error has gone or not. As mentioned in the introduction, stop code - Inaccessible Boot Device error or stop code - Unmountable Boot Volume error could also be caused by the hard drive of your PC. In this solution, we will be fixing hard drive issues via command prompt. Before we get into that, make sure to remove any external hard disk attached to your system.
Reboot your system after these steps are completed. Your stop code - Inaccessible Boot Device should be fixed now! It's time to Enter Safe Mode! More than often, your system gets stuck in the process of rebooting after the stop code: Inaccessible Boot Device appears. Step 1: Hold on the "Power" button to turn your system on and press it again to turn it off. Repeat this process twice or thrice to begin Automatic Repair.
Hit "Restart". Follow these simple steps to perform Windows 10 reset and fix stop code - Inaccessible Boot Device error. When hardware like RAM is faulty, you are likely to get such an error. And therefore, if the above solutions didn't help you, try to check for any faulty hardware.
0コメント